The Motley Fool

This Ultra-High-Yield Dividend Stock Is Safer Than It Has Ever Been

Energy Transfer (NYSE: ET) has come a long way over the past few years. The master limited partnership (MLP) has worked hard to shore up its financial position. That included slashing its distribution in half a few years ago to retain additional cash for debt reduction.

The energy midstream company has since rebuilt its distribution, which is now higher than its prior peak. That bigger payout, which currently yields 8.7%, is on an extremely firm foundation. That was one of the key takeaways from the MLP 's recent fourth-quarter earnings conference call .

Energy Transfer's best financial shape in years

On the call, Energy Transfer's co-CEO and CFO, Tom Long, discussed the company's much-improved financial situation. He commented, "As a result of our continued emphasis on strengthening our balance sheet, we are in the strongest financial position in Energy Transfer history."

Long highlighted that the company made meaningful progress last year to continue shoring up its financial foundation by using excess cash to repay debt. As a result, the MLP enters this year expecting its leverage ratio to be in the lower half of its 4.0-4.5 times target range. This improvement has drawn praise from credit agencies Fitch and S&P Global , which have upgraded its bond rating to BBB.

The company's higher credit rating makes it easier to access lower-cost capital. It capitalized on that earlier this year by issuing $3 billion of senior notes due in 2034 and 2054, with yields of 5.55% and 5.95%, respectively. It also issued $800 million of junior notes due in 2054 that yield 8%.

Energy Transfer used that capital to refinance existing debt and repurchase three series of its preferred units . Redeeming the preferred units will help simplify its capital structure and save it some money.

The flexibility to create more value for investors

Long noted that the company's financial strength "will allow us the flexibility to balance pursuing new growth opportunities with further leverage reduction, maintaining our targeted distribution growth rate and increasing equity returns to our unit holders." The company has already set a goal of increasing its high-yielding distribution by 3% to 5% per year. On top of that, it has the financial capacity to pursue new growth opportunities (acquisitions and organic investments) while returning additional cash to investors, which should increase its valuation.

It has accomplished all three over the past year. As noted, it has already started buying back some of its preferred units. Meanwhile, the company closed two acquisitions last year. It has also approved new expansion projects, including the $1.25 billion expansion of its Nederland terminal.

The MLP is in an excellent position to continue growing its operations and enhancing value for investors. While it hasn't launched a common unit repurchase program, it has the financial flexibility to buy back some of that equity this year.

Meanwhile, it has excess cash flows to easily support up to $3 billion of annual growth capital spending. It plans to invest $2.3 billion-$2.6 billion this year, allowing it to add additional growth projects as opportunities emerge. It currently has several exciting projects under development that could drive future growth.

On top of all that, Energy Transfer has the balance sheet strength to continue consolidating the midstream sector. It made two notable deals last year, buying Lotus Midstream for about $1.5 billion and acquiring fellow MLP Crestwood Equity Partners in a $7.1 billion deal. The company structured those leverage-neutral transactions to maintain optimal balance sheet flexibility.

Future deals will enable the company to capture cost savings (it expects to realize $80 million in cost savings from the Crestwood deal) and grow its cash flow, giving it more money to increase value for investors.

An increasingly safe income stock

Energy Transfer has significantly enhanced its financial foundation over the past few years. This means the company's big-time payout is safer than ever. That makes the MLP a great option for those seeking a sustainable, steadily rising income stream.

Should you invest $1,000 in Energy Transfer right now?

Before you buy stock in Energy Transfer, consider this:

The Motley Fool Stock Advisor analyst team just identified what they believe are the  10 best stocks for investors to buy now… and Energy Transfer wasn’t one of them. The 10 stocks that made the cut could produce monster returns in the coming years.

Stock Advisor provides investors with an easy-to-follow blueprint for success, including guidance on building a portfolio, regular updates from analysts, and two new stock picks each month. The Stock Advisor service has more than tripled the return of S&P 500 since 2002*.

See the 10 stocks

*Stock Advisor returns as of February 12, 2024

Matt DiLallo has positions in Energy Transfer. The Motley Fool has positions in and recommends S&P Global. The Motley Fool has a disclosure policy .

This Ultra-High-Yield Dividend Stock Is Safer Than It Has Ever Been

Stock Transfer and transfer posting Steps in SAP

Stock transfer.

The stock transfer is nothing but transferring of materials from one plant to another storage location, from plant to plant, plant of company code to plant of another company code. When the stock transfer happens between plants, then the quantity changes in both plants.

Transfer  posting

Transfer  posting is a removing of materials from one plant and moving to another plant or location. Examples of transfer postings are as follows.

  • Postings from material to material, plant to plant
  • Transfer posting from valuation type to valuation type
  • Release the quality inspection stock that is moving the stock to unrestricted use in SAP

Difference between stock transfer and transfer posting

The difference between stock transfer and transfer posting are as follows

Online Tutorials & Training Materials | STechies.com

Intracompany Plant to Plant Stock Transfer Accounting Entries

Updated Aug 22, 2018

Hi Experts,

Please suggest to me in the following.

We had a requirement that the client want to do the Billing activity in Intracompany Stock Transfer. Can you please let me know the possibility and how to achieve this?

Generally in the Intracompany Plant to Plant stock transfer when we use 641 Movement type the entry at the time of Outbound Deliver and PGI will be: Debit - Inventory FG (Receiving Plant) Credit - Inventory FG (Sending Plant) There will be no entry at the time of Proforma Invoice (VL01N) And at the time of Goods Receipt (MIGO) at receiving plant the there will be no Accounting Entry. But the Proposed Entries are as follows: (This will be more similar to Sale and Purchase)

1. At the time of PGI:

  • Debit- COGS Account
  • Credit- Inventory FG Account (Sending Plant)

2. During Billing:

  • Debit- Inter Unit Clearing Account (Generally here it should be Customer)
  • Credit- Branch Transfer Account (Generally it would be Revenue account)

3. During MIGO:

  • Debit- Inventory FG Account (Sending Plant)
  • Credit- Change in Stock Account

4. During MIRO:

  • Debit - Branch transfer a/c
  • Credit- Inter Unit Clearing A/c

Later this Inter Unit Clearing Account needs to be Knocked off between the Entry raised during Billing and the entry during MIRO. Is it possible through Standard SAP? Please suggest. Or is there any alternative methodology to achieve the Accounting effect?

How you are expecting the accounting entry in the recieving plant, because value area is same and the transfer is between two plants in the same company code.

During Intra company transfer you can not get any accounting entries because the trasfer is happens betwwen plant to plant between same company code....you will get a proforma invoice it is the refeence doc. 

  • What is SAP MM?
  • SAP MM Training Tutorials for Beginners
  • SAP Master Data
  • SAP MM Valuation Class
  • SAP MM Tree Menu
  • SAP MM Split Valuation
  • What is MRP in SAP MM
  • SAP Reverse Material document
  • SAP MM Process Flow
  • SAP MM Movement Types
  • SAP Vendor List
  • Delete Material in SAP
  • SAP MM Release Strategy
  • SAP MM Accounting Entries
  • SAP MM Pricing Procedure
  • SAP MM Transaction Codes
  • SAP MM Certification Cost in India
  • SAP MM Consultant Salary & Job Profile
  • SAP MM Interview Questions

Intracompany Plant to Plant Stock Transfer Accounting Entries

Hi Experts, Please suggest to me in the following. We had a requirement that the client want to do the Billing activity in Intracompany Stock Transfer. Can you please let me know the possibility and how to achieve this? Generally in the Intracompany Plant to Plant stock transfer when we use 641 Movement type the entry at the time of Outbound Deliver and PGI will be: Debit - Inventory FG (Receiving Plant) Credit - Inventory FG (Sending Plant) There will be no entry at the time of Proforma Invoice (VL01N) And at the time of Goods Receipt (MIGO) at receiving plant the there will be no Accounting Entry. But the Proposed Entries are as follows: (This will be more similar to Sale and Purchase) 1. At the time of PGI: Debit COGS Account Credit Inventory FG Account (Sending Plant) 2. During Billing: Debit - Inter Unit Clearing Account (Generally here it should be Customer) Credit Branch Transfer Account (Generally it would be Revenue account) 3. During MIGO: Debit Inventory FG Account (Sending Plant) Credit Change in Stock Account 4. During MIRO: Debit - Branch transfer a/c Credit Inter Unit Clearing A/c Later this Inter Unit Clearing Account needs to be Knocked off between the Entry raised during Billing and the entry during MIRO. Is it possible through Standard SAP? Please suggest. Or is there any alternative methodology to achieve the Accounting effect?

User: spicehead-leoaibkk

Popular Topics in Enterprise Software

Author previous_toolbox_user

This topic has been locked by an administrator and is no longer open for commenting.

To continue this discussion, please ask a new question .

Read these next...

Curated Snap! -- Zapper Down, Mistakes Enforced, Brain Cancer Win, Personal Temperature

Snap! -- Zapper Down, Mistakes Enforced, Brain Cancer Win, Personal Temperature

Your daily dose of tech news, in brief. Welcome to the Snap! Flashback: February 16, 1978: The first BBS goes online (Read more HERE.) Security News: • Ex-Employee’s Admin Credentials Used in US Gov Agency Hack (Read more HERE.) • Z...

Curated Can anyone suggest an outbound SMTP relay service provider

Can anyone suggest an outbound SMTP relay service provider

I testing several self hosted open source community based mail servers like Zimbra and iRedmail.  I'm using self hosted server created in my lab at home.  My Internet service provider is blocking outbound SMTP, and therefore I'm looking for a service prov...

Curated Help Load Test the New Community Site on 2/21!

Help Load Test the New Community Site on 2/21!

The new community site is speedily approaching, and that means, of course, the opportunity to get a shiny new badge... maybe even two!Here's what you have to do:We want as many people as possible to go visit the community playground site (https://communit...

Curated Do you do vulnerability tests regularly or once a year?

Do you do vulnerability tests regularly or once a year?

I'm just curious what the masses do. Thank you!

Curated Spark! Pro Series - February 16th, 2024

Spark! Pro Series - February 16th, 2024

Probably one of the most famous archeological events in history happened on this day in 1923. It was this day that Howard Carter unsealed the tomb of Tutankhamun. The tomb was in remarkable shape, due mostly to the fact that it had been covered with r...

ERProof - Blog about All Things SAP

Blog about all things SAP

ERProof » SAP MM » SAP MM Training » SAP Stock Transport Order and Stock Transfer Process

SAP Stock Transport Order and Stock Transfer Process

' src=

For example, in one of my trading client, we used to import materials from abroad in big containers and then those containers were unloaded into one big branch (plant) as it was cost efficient to import materials in bulk to one location. Next, other smaller branches (plans) raised SAP stock transport order (STO) to purchase stock from big branch for the quantity required. The big branch dispatched the quantity against the STO on the mentioned delivery dates.

In the below screenshot, you can see a diagram illustrating the stock transfer process. STO is raised by a receiving plant and sent to a supplying plant. The supplying plant then delivers the material, which in the SAP system will be shown as stock in transit. When the receiving plant receives the material, goods receipt takes place at the receiving plant. There is no invoicing, as the stock is transferred between plant that are part of the same company.

Stock Transfer with SAP Stock Transfer Order (Example)

How to Create SAP Stock Transport Order?

To create a stock transport order in SAP, please follow the steps described below. First, either start the transaction ME21N or navigate to the following path in SAP menu:  Logistics – Materials Management – Purchasing – Purchase Order – Create – ME21N – Vendor/Supplying Plant Known .

Menu Path for ME21N Transaction

Stock transfer process uses the standard transaction ME21N for creating purchase orders (PO), where we trigger STO process by selecting document type = Stock Transport Order as shown on the screenshots below.

ME21N - Create a Purchase Order

Here you need to provide your supplying plant. As mentioned above, the supplying plant in our example is the big branch which imported the stock and has stock available. You also have to provide your purchase organization, purchase group and company code as show on the screenshot below. Our tutorials about SAP MM organizational structure should be helpful in learning more about purchasing organization and other MM organizational units.

Enter Supplying Plant, Purchasing Organization, and Company Code in STO

In the item overview screen below, you need to provide the material that you would like to procure from the supplying plant along with the plant number which is ordering this material, quantity, storage location and delivery dates as shown below:

Items of Stock Transfer Order

If you have any additional charges which needs to be added to the cost of the material, you should provide the details in the conditions tab. For instance, it is possible to add freight charges as shown below:

Pricing Conditions of Stock Transfer Order

Goods Issue Against SAP Stock Transport Order

Once the STO is created, the next step is to do a goods issue against the STO raised above. Go to the transaction MIGO or navigate to the following path in SAP menu:  Logistics – Materials Management – Inventory Management – Goods Movement – MIGO .

MIGO Transaction in SAP Menu

In MIGO, it is necessary to do goods issue against a purchase order, with a movement type 351 which is used for moving materials from supplying plants to stock in transit of receiving plants.

Goods Issue in MIGO Transaction

Here you need to enter the number of STO, set OK checkbox for the item and then click on Post button which will post your goods issue and provide you a message that a material document was created (see screenshots below).

Set OK Checkbox for the Item

Goods Receipt Against SAP Stock Transport Order

Now, the last step is to do goods receipt in the receiving plant when the goods physically arrive there. Goods receipt is also done in MIGO transaction. It is necessary to perform goods receipt against a purchase order using the movement type 101 as shown below. Then, set the OK checkbox next to the material item and finally post the document by pressing Post button. The system will provide you a message that the material document was posted.

Goods Receipt against STO

Did you like this SAP MM tutorial? Have any questions or comments? We would love to hear your feedback in the comments section below. It’d be a big help for us, and hopefully it’s something we can address for you in improvement of our free SAP MM tutorials.

Navigation Links

Go to next lesson: Subcontracting Process in SAP

Go to previous lesson: SAP Procure to Pay Process

Go to overview of the course: SAP MM Training

56 thoughts on “SAP Stock Transport Order and Stock Transfer Process”

Thanks, its so useful in my industry work.

Dear, This is Intrastate STO process. Will you please share Inter state STO process.

Use 301 for plant to plant and Sloc 311 mvt type

Thank you! Very good explanation.

Clear and fruitful explanations

As a SAMS-1E, ULLS -AE n GCSS user, I see so much resemblance in processes though there is a slight change in the terminologies used. SAP ERP, has broken down the purchasing process, made it simpler to understand once you can understand and keep track of the terminology.

STO process made easily understandable by excellent explanation.

Do we need PO number in STO? In the first step you have mentioned to do STO, what should we put in PO space?

STO is simply a special type of PO.

We need to put respective created STO number.

it was very useful

Hello All, Can i know , how to find STO no , but via material document ?

If you open your material document in MIGO transaction, you can see STO number in item details on tab “Purchase Order Data”. It is also saved in MSEG table (field EBELN).

I want to say a very big thanks, the write up was very useful. I would also want to know how to raise a PR. And would also want to take a course on PM.

Please check the tutorial about SAP Purchase Requisitions . Here is the link to our free SAP PM training .

Sometimes TR generated but TO not generated. How I can see the list of documents not have transfer order number generated. Or how I can have list documents without TO order

If there is any help on line. SAP related queries

Please post your queries at our SAP Forum .

Hi Cleo. Please explain the answers to this question especially the last one

SAP supports several variations of Stock Transfer process with a Stock Transport Order (STO). What are they? Stock transfer with STO and a delivery document in one step Stock transfer with STO and a delivery document in two steps

Stock transfer with STO without a delivery document in two steps

Stock transfer with STO and a delivery document in one step -> Possible Stock transfer with STO and a delivery document in two steps -> Possible Stock transfer with STO without a delivery document in two steps -> Possible

Hi Cleo. Please explain the answers to this question also especially the last one

In two-steps Stock Transfer process, when accounting documents are created and posted?

During goods issue from the supplying plant. Accounting documents are created only if materials have different valuation classes at the supplying and the receiving plants.

SAP needs to create accounting documents only if material stock will be allocated to different G/L accounts. This is the case when materials have different valuation classes. Otherwise, since the material stock is just moved from plant to plant within the same storage location, SAP doesn’t need to update accounting records.

Excellent Knowledge for Goods movement. Thanks A lot.

Very Good Stock Transfer Oder from Plant To Palt ,Thanks A Lot

Hi Team, May I know who will create PO Ex: Big branch plant or receiver plant? Regards, Bala.

Receiving team creates a PO by mentioning all of their material/services requirements.

Receiver will create PO

what is stock transfer and transfer posting? what is the difference between them?

i created sto no. in me21n and now i am searching it on migo but it didnt search i want to transfer stock one plant to other plant

Great place to learn. Being new to MM, it’s helpful for me to get an idea of how MM works.

Nice explanation, its really good.

Thanks . Very handy and useful.

Nice explanation..easy to understand

Wonderful explanation.

# How do we do Inter-plant stock transfers? e.g. Plant A (Belgium, Currency: EUR) and Plant B (China, Currency: CNY); stock requirement is from Plant A; Source is Plant B; Both the plants are of the same group company Please suggest.

Very good explanation, just to add small information the item category used is “U”.

Hello When I am trying to do the MIGO for 2nd time with MT101 it is showing posting not allowed for document type ZST. Can u please help

Excellent article with simplicity. Many thanks!!

Hi Thank you for all tutorials. Could you please advise the process of how to run oustanding STO.

how can i take out the report for GI Vs STO number for stock transfers.

i need a bulk report for taking out the all the GI numbers Vs STO numbers for stock transfers between 2 DC for a selected period

hi i need to create Testing scenarios for STO and Intercompany STO.

Where can i find examples to create testing scenarios.

hi what is the tcode to get simple report of open STO with qty and dates? cant find

hi you can use tcode: me2n for that, just supply the STO no. or simply put in document type: UB or ZUB and specifiy supplying site, document date range of your search and article no. ; it will show you by document number with date, po history, supplying site, target site, quantity in sku, order qtuantity, order unit, order price unit, net value, currency, release indicator, qty release, still to be invoiced (value), Still to be delivered (value)

Is there a report that can be generated to compare what was ordered to what has been received if there are any discrepancies

How to batch uplod SAP drawings from public folder ?

Can you please give us the sample ? Thank and Regards,

In our company we use the order type UB Stock transport order which is a fully automatic process. The only problem we have is the stock transfer of Bulk Material. We would like to create a manual Stock Transfer Order for Bulk Material. Using the UB stock transfer in ME21N the following error comes up and a picking list is not printed.

“Material managed in bulk, purchasing on stock forbidden”

Is there a solution in SAP to transfer bulk-material via an stock transfer order? Regards, Jan

thanks – simple and good

How can I move quality inspect/restricted material on a STO? Currently we are making it unrestricted and creating a STO then return it to restricted after receiving it., There has to be a way ship QI and release later.

Hi , I am looking for QM process for the STO GR at recieving plant. Let me know anyone have idea

How can I create delivery document in STO process ?

If required material is Handling Units then what should we do while making STO?

At the time of creating STO by using t code ME21N it is not showing create ME21N- vendor/supplying plant known.

It is very Informative and explained very much in detail that Layman can understand. Thanks you very much for your Effort.🙏

Can we create a schedule Line of STO ? If yes,how to do ?

How can create inspection lot for the STO GR at receiving plant, stock should go to QI the result recording and UD finally to UR.

Leave a Reply Cancel reply

Do you have a question and want it to be answered ASAP? Post it on our FORUM here --> SAP FORUM !

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

SAP Logo

2130024 - MB5T - Stock in Transit for Intracompany

For an Intracompany STO, it is only possible to close the Stock Transport Order Item when the issued quantity equals the received quantity.

Environment

  • Materials Management (MM)
  • SAP ERP Central Component
  • SAP enhancement package for SAP ERP
  • SAP enhancement package for SAP ERP, version for SAP HANA
  • SAP S/4HANA

ECC, MARC-TRAME, stock transfer, scrapping, damaged, stolen, 641, 101, intra-company, goods receipt, goods issue, 551, two-step, STO, receiving plant, issuing plant, MB5T, SiT, Stock in Transit, physical inventory, missing, cannot see, Display purchase orders with delivery completed too, remove, delete , KBA , MM-IM-ST , Stock Transfer / Transfer Posting , MM-PUR-GF-STO , Stock Transfer , MM-IM-ST-PO , Stock Transfer for Stock Transport Orders , How To

About this page

Search for additional results.

Visit SAP Support Portal's SAP Notes and KBA Search .

Privacy | Terms of use | Legal Disclosure | Copyright | Trademark

SAP MM –Movement Types

Movement types.

Movement types are the core of Inventory Management in SAP. This three digit key controls the movement of the materials in SAP (eg: Goods Receipt, Goods Issue, Stock transfer and Stock maintenance). It is already predefined in SAP, how the financial accounting needs to be posted during any material movement. Apart from this depends on business requirement, new movement types can be created by copying existing movement types. For a better understanding of Movement Type, we should know about stock types. Stock types define the state, usage, and usability of the material.

Different Stock types in SAP are

  • Unrestricted Stock,
  • Quality Inspection Stock,
  • Blocked Stock.

Special Stocks

Special stocks are one, that should be managed separately and it is not belonged to any particular company or being warehoused in a particular location. Special stocks are used along with the above mentioned three stock types.

List of Special Stock

Customizing Path: SPRO (T code) ---> IMG ----> Materials Management---> Inventory Management & Physical Inventory ---> Movement Type ---> Copy, change Movement type

T – Code – OMJJ

Table – T156

List of Movement Type in SAP

very helpfull

Awesome ! Thanks

Very helpfull

Hi Sir, Can you make a video in WM Movement types and what is the difference between mm & wm movement types.

very very helpful and Good detail Really appreciated Efforts

very very useful content. thanks alot.

Great Work for ever

Great work sir. very very useful content. thanks a lot.

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

COMMENTS

  1. This Ultra-High-Yield Dividend Stock Is Safer Than It Has Ever Been

    An increasingly safe income stock. Energy Transfer has significantly enhanced its financial foundation over the past few years. This means the company's big-time payout is safer than ever. That ...

  2. This 8.9%-Yielding Dividend Stock Is Coming Off a Record Year (and 2024

    A top-notch income stock. Energy Transfer delivered record operational results and strong financial performance in 2023. It has lots of momentum heading into 2024 due to the late-year closing of ...

  3. This Ultra-High-Yield Dividend Stock Is Safer Than It Has Ever Been

    The Stock Advisor service has more than tripled the return of S&P 500 since 2002*. See the 10 stocks *Stock Advisor returns as of February 12, 2024. Matt DiLallo has positions in Energy Transfer ...

  4. Is Energy Transfer Stock Going to $22? 1 Wall Street Analyst Thinks So

    Investment bank UBS recently adjusted its price target on midstream giant Energy Transfer (ET 0.90%). While it trimmed the target from $23 per unit to $22, it maintained its buy rating.

  5. Movement Types (Project Stock)

    641. Q. Two-step stock transfer with an outbound delivery. An intra-company stock transport order is used to transfer the project stock between a sending plant and a receiving plant in a two-step procedure using an outbound delivery. An outbound delivery document is created for the stock transport order.

  6. reversal through 642

    Hi All, We have two plants and we do stock transfer regularly. we use movement 641 for that. now there is some stock in transit..but physically it is there in supplying

  7. Stock Transport Order with Delivery

    The movement type for the goods issue is 641 for a stock transfer within company code and 643 for a stock transfer for cross company code. But the process can also be executed in one step posting the goods issue and the goods receipt simultaneously.

  8. Stock Transfer Overview

    Note: Stock Transfer can be carried out in one step (movement type 647) or 2 step (movement type 641), You can post the goods receipt into quality stock or block stock at receiving plant as well for instance to check the quality of a material or some document is missing or incomplete as per the warehouse policy of the company, Goods Receipt ...

  9. Stock Transfer Using a Stock Transport Order

    Stock Transfer Between Plants in Two Steps Stock Transport Order Without Delivery Stock Transport Order with Delivery via Shipping Stock Transfer Procedure for Cross-Company-Code Stock Transfer Plant Return and Store Return with Stock Transport Order Availability Check for Stock Transport Order Goods Issue for a Stock Transport Order

  10. How to Post STO With Movement Type 641 to Stock in Transit Account

    Business requirement here is to transfer stock from one site to another through STO 641 transaction and post Stock in transit Dr and Stock Credit. I have maintained Stock account against BSX in OBYC. I have tried maintaining Stock in transit GL account in transaction keys GBB-VKA & VBR.

  11. Stock Transfer and transfer posting Steps in SAP

    The stock transfer is nothing but transferring of materials from one plant to another storage location, from plant to plant, plant of company code to plant of another company code. When the stock transfer happens between plants, then the quantity changes in both plants. Transfer posting

  12. SAP Movement Types

    Movement Type: 343 is used to Transfer Goods From Blocked to UnRestricted Stock. Movement Type: 344 is used to Transfer Goods From UnRestricted Stock to Blocked. Movement Type: 349 is used to Transfer Goods From Blocked to Quality Stock.

  13. Stock Transfer Order two step process

    we are using movement types 641 & 101. Now our client rerquiement is : when goods issue is posting in supply plant ( movement type 641), the accounting entry should be Goods in Transit A/C dr TO Stock Account Cr.

  14. Stock in Transfer vs Stock in Transit. Where to fi...

    16 Kudos The purpose of this blog post is to explain the difference between Stock in Transfer and Stock in Transit demonstrating where we can check the stock (table/tcode), and how to remove the stock if necessary. What is the difference between Stock in Transfer and Stock in Transit?

  15. Intracompany Plant to Plant Stock Transfer Accounting Entries

    Generally in the Intracompany Plant to Plant stock transfer when we use 641 Movement type the entry at the time of Outbound Deliver and PGI will be: Debit - Inventory FG (Receiving Plant) Credit - Inventory FG (Sending Plant) There will be no entry at the time of Proforma Invoice (VL01N) And at the time of Goods Receipt (MIGO) at receiving ...

  16. This Elite 6.6%-Yielding Dividend Stock Just Increased Its Payout Again

    In addition, it agreed to a $6 billion ($5 billion in cash and $1 billion in stock paid through 2029) settlement of litigation against the company's Combat Arms earplugs.

  17. Intracompany Plant to Plant Stock Transfer Accounting Entries

    Generally in the Intracompany Plant to Plant stock transfer when we use 641 Movement type the entry at the time of Outbound Deliver and PGI will be: Debit - Inventory FG (Receiving Plant) Credit - Inventory FG (Sending Plant) There will be no entry at the time of Proforma Invoice (VL01N) And at the time of Goods Receipt (MIGO) at receiving ...

  18. Stock transfer

    In SD for sechedule line category assign the movement type 641. 2nd Process

  19. SAP Stock Transport Order and Stock Transfer Process

    Stock transfer process uses the standard transaction ME21N for creating purchase orders (PO), where we trigger STO process by selecting document type = Stock Transport Order as shown on the screenshots below. ME21N - Create a Purchase Order. Select Stock Transport Order as the Document Type. Here you need to provide your supplying plant.

  20. 1934611

    The stocks do not physically exists in "Stock in Transfer," however it is displayed in MMBE MB52 The value in MARC-UMLMC is reflected in MMBE MB52 and it has to be corrected. The value in MARD-UMLME is reflected in MMBE and it has to be corrected. Materials Management (MM) SAP ERP Central Component SAP enhancement package for SAP ERP

  21. Partial reversal of stock in transit

    Home Community Questions Search Questions and Answers Vote up 0 Vote down Former Member Jun 30, 2014 at 10:18 AM Partial reversal of stock in transit 177 Views Follow RSS Feed Dear Sir, I have a scenario for intra company stock transfer. Goods are issued (tcode VL10B and PGI) from Plant A to Plant B (movment type 641) with reference to a STO.

  22. 2847950

    You want to create a Delivery via VL10D with movement type 647 however the system assigns movement type 641 once the delivery is created. ... LIPS-BWART, TVEP-BWA1S, ts_ettyp, VOV6, VOV5, "Schedule Line Category", "Item Category", ECC. , KBA , LE-SHP-DL-STO , Stock-Transfer-Order , Problem . About this page This is a preview of a SAP Knowledge ...

  23. Intra-Company Stock Transfer (Domestic)

    The process runs as follows: Intra-Company Stock Transfer (Domestic) Creation of a stock transport order with an excise duty related material in the item (transaction MEPO ). Entering of scenario-relevant excise duty goods issue and excise duty goods receipt parameters for the purchase order item. Creation of delivery note for the stock ...

  24. 2130024

    ECC, MARC-TRAME, stock transfer, scrapping, damaged, stolen, 641, 101, intra-company, goods receipt, goods issue, 551, two-step, STO, receiving plant, issuing plant ...

  25. Energy Transfer Could Be Getting Close to Securing a Much-Needed

    Energy Transfer (ET 0.90%) has been working to convert its Lake Charles facility from importing natural gas to a liquefied natural gas (LNG) export terminal for over a decade. The company has ...

  26. SAP MM

    This three digit key controls the movement of the materials in SAP (eg: Goods Receipt, Goods Issue, Stock transfer and Stock maintenance). It is already predefined in SAP, how the financial accounting needs to be posted during any material movement.

  27. Movement Types for Valuated Stock in Transit

    Cross-Company-Code Processes Intra-company-code stock transfers and returns stock transfers In the following intra-company-code processes, valuated stock in transit specifies the exact time of the transfer of title: Stock transfer with transfer of title at goods issue (schedule line category N4)

  28. Stock in Transit not appearing in MMBE

    Steps: 1) Go To T-Code: OMBG 2) Select the Rules for display of Stock balances 3) Check whether Field name is added in any of the Version 4) If not available in the Version 1 in the last window add the column No and Field Name: TRASF Eg: If you want to add the Stock in Transit CC field (TRASF) in version 1 in the Window 5 of Column 3 Enter

  29. New York Community Bank's stock price is plunging, but that won ...

    As scary as it may be to see a bank's stock price plunging, it's not the best gauge for the bank's viability. The best source of information on that front is a bank's deposit flows ...