• Attack Strategies
  • Custom Tools For Kali Linux
  • Information Gathering Tools
  • Password Attacks
  • Writing Reports

Best Kali Linux Tutorials

Best Kali Linux Tutorials

This blog is not official website of kali linux. we just share tutorials to learn cybersecurity., how to configure static ip address in kali linux.

static ip in kali linux

  • Configure static IP in router settings.
  • Configure static IP in the Network Manager in our Kali Linux.
  • Configure static IP in command line.
  • Configure an External static IP.

Configure static IP in router settings

Static IP address in routersettings

Configuring Static IP Address in Network Manager

Advanced Network Manager

Configuring Static IP in command line

#Static IP address auto wlan0 iface eth0 inet static address 192.168.225.100 netmask 255.255.255.0 gateway 192.168.225.1

static IP adress

Configure an External static IP

24x7serversupport Blog

Linux | CPanel | WHM | webhosting| Plesk | DirectAdmin | CentOs | Debian | Ubuntu Blog

Configuring a Static IP Address in the Kali Linux Command Line

By 24x7support.

kali-linux

If for some reason you do not use Network Manager (for example, if you use Linux without a desktop graphical environment), you can configure a static IP address on the command line.

To do this, open the /etc/network/interfaces file with any text editor:

Only four lines should be added to this file. Example strings:

Let us examine them in more detail. eth0 is the name of the network interface. If there is only one network card, then in Debian (i.e., in Kali Linux too), this interface is called eth0. The second network interface is named eth1, etc.

If you are not sure, you can find the name of the wired network interface with the command:

In the second line, you need to use the same interface name ( eth0 ).

Further in the third line, 192.168.0.100 is the IP that we want our system to always have. And /24 is an alternative way to set netmask. These characters correspond to 255.255.255.0.

As you might guess, in the last, fourth line, 192.168.0.1 means a gateway.

All these data need to be changed to fit your needs.

For the changes to take effect, issue the command:

Let’s check:

As you can see, the interface is really assigned the required IP and now it will be saved after each reboot.

However, there is currently no Internet connection, because we have not configured DNS. These settings are made in the /etc/resolv.conf file. If you already have Network Manager installed, then instead of /etc/resolv.conf there is a link to /run/NetworkManager/resolv.conf

Open /etc/resolv.conf with any text editor:

and add the line:

Finally, now you can check:

On Kali Linux, the made changes do not disappear after the download. If they disappear, the file /etc/resolv.conf can be protected from writing:

Share this:

Related post, bad magic number in superblock, how to install java jdk in kali linux, how to install kali linux, differences between kvm and openvz, how to convert disk from mbr to gpt for ovh dedicated server, how to easily encrypt/decrypt a file in linux with gpg, some useful commands for account migrations in cpanel server.

Ethical hacking and penetration testing

Infosec, it, kali linux, blackarch, how to configure kali linux to use a static ip address, table of contents.

1. What are advantages of a static IP address usage?

2. Manually assigning IP addresses bypassing DHCP in the router

3. What are Address, Netmask, Gateway and DNS server when setting up a static address

4. Setting up a static IP address in Kali Linux (in Xfce)

5. Configuring a Static IP Address in Network Manager in Kali Linux (GNOME)

6. Setting up a static IP address in Kali Linux (in Cinnamon)

7. Configuring a Static IP Address in the Kali Linux Command Line

What are advantages of a static IP address usage?

On a local network, a static IP address allows you to use the Web server, SSH, FTP and other network services without having to get to know IP of a system on which these services are running each time. If you do not use these services, then there is no need to configure a static IP.

A static address for a particular computer or other device can be set in several ways:

  • in the settings of your router, bind the MAC address to the IP address: in different routers the configuration process may be slightly different, but usually these functions are located in the Local network (LAN settings) -> DHCP server -> The list of manually assigned IP addresses bypassing DHCP.
  • setting up a static IP address in Network Manager
  • setting up a static IP address in the command line

Manually assigning IP addresses bypassing DHCP in the router

A static IP address can be configured on the router. The router uses a MAC address to identify devices, so you can save pairs of MAC and IP addresses in the router settings (see also “ How to find the MAC address and How to find the manufacturer by MAC address ”).

The specific steps for binding the MAC address to the IP address in the router depend on the device model. Therefore, if you have any questions or you can not find the desired setting in your router, then refer to its manuals. In this case, the actions do not depend on the device to which you want to assign a permanent IP address, since all the configuration is performed in the router. Also, after resetting the settings on the device to which the permanent IP address was assigned (for example, when reinstalling the OS on the computer or Factory Reset of the phone), then the binding of the IP address to the device is preserved, since the MAC address is always unchanged.

This method is not suitable for virtual machines, even if a network connection of the Bridge type is used.

What are Address, Netmask, Gateway and DNS server when setting up a static address

Whichever method of setting a static IP address you choose, and in whatever graphical environment you set a static IP address, you will need to enter values for the following fields:

Address is a static IP address that you want to assign to this computer. Typically, home routers have addresses like 192.168.0.* or 192.168.1.*, where instead of an asterisk there is a number from 2 to 254. An IP address ending in one is usually the router itself, and an IP address ending in 255 is broadcast.

Netmask – If you are setting up a home router, then usually the netmask is 255.255.255.0, this same value in another notation is written as “/24”.

Gateway is the IP address of the router. This is usually 192.168.0.1 or 192.168.1.1

DNS is a DNS server, if you do not know what to specify, you can use the following IP addresses as DNS servers: 8.8.8.8 and 8.8.4.4.

When done, click the Apply button.

By the way, if you are already connected to the local network, to find out the gateway (IP address of the router), run the command:

The following will be displayed:

After the ‘ default via ’ line, the IP router will follow, in my case it is 192.168.0.1.

To apply made changes enter:

Check your current local IP with the command:

change static ip kali linux

Setting up a static IP address in Kali Linux (in Xfce)

Xfce is the default graphical desktop environment in Kali Linux.

Since the computer is already connected to the network and it received network settings (IP address, gateway address, etc.), then to see the current values, run the command:

change static ip kali linux

Pay attention to the line

It means that the IP address 192.168.1.51 is assigned to the eth0 network interface, the subnet mask is /24. To find out the gateway address, replace the last digit in the IP address with “1”, that is, in this case, the gateway address is 192.168.1.1.

Suppose I want the computer to be configured to have a static IP address of 192.168.1.101.

Next to the clock, right-click on the network connections icon.

change static ip kali linux

In the context menu that opens, click on “ Edit Connections… ”.

Select the network for which you want to configure a static IP address and click the gear icon.

change static ip kali linux

In the window that opens, go to the “ IPv4 Settings ” tab. Select “ Manual ” for the “ Method ”. Then click the Add button and enter the values you want.

change static ip kali linux

When everything is ready, click the “ Save ” button.

change static ip kali linux

Changes will take effect after reconnecting to the network.

Using the command

make sure that the IP address that was assigned to the computer is actually used:

change static ip kali linux

Configuring a Static IP Address in Network Manager in Kali Linux (GNOME)

GNOME is the default graphical desktop environment in previous versions of Kali Linux. Currently, you can still select GNOME (or any other graphical desktop environment) when installing the OS.

In Linux, a static address in a graphical environment can be set in the Network Manager settings. To do this, click on the arrow in the upper right corner of the screen, in the menu that appears, click on ‘ Wired Connected ’, and then on ‘ Wired Settings ’:

change static ip kali linux

A new window will open, in it click on the gear icon:

change static ip kali linux

Another window will open, in which go to the IPv4 tab:

change static ip kali linux

select ‘ Manual ’:

change static ip kali linux

then enter the desired static IP in the ‘ Addresses ’ field, it should match your network, for example, if the router (default gateway) has the address 192.168.0.1, then the selected address should be 192.168.0.*, if the router has the address 192.168.1.1, then the selected IP should be of the form 192.168.1.* etc. Next, write down the ‘ Netmask ’, for most tasks 255.255.255.0 is suitable, also write the ‘ Gateway ’, which is the IP router, an example:

change static ip kali linux

If you wish, you can also set the DNS server settings, but this is not mandatory.

Setting up a static IP address in Kali Linux (in Cinnamon)

Cinnamon is a graphical desktop environment that, although not included by default in Kali Linux, is quite popular among users. Optionally, Cinnamon can be installed on Kali Linux.

To configure a static IP address in Cinnamon, click on the network connection icon and select “ Network Settings ”.

change static ip kali linux

Select the network adapter for which you want to configure, then select the network and click the gear icon next to it.

change static ip kali linux

Select the “ IPv4 ” tab, switch “ Addresses ” to “ Manual ”, enter the information you need and click the “ Apply ” button.

change static ip kali linux

Configuring a Static IP Address in the Kali Linux Command Line

If for some reason you do not use Network Manager (for example, if you use Linux without a desktop graphical environment), you can configure a static IP address on the command line.

To do this, open the /etc/network/interfaces file with any text editor:

Only four lines should be added to this file. Example strings:

change static ip kali linux

Let us examine them in more detail. eth0 is the name of the network interface. If there is only one network card, then in Debian (i.e., in Kali Linux too), this interface is called eth0. The second network interface is named eth1, etc.

If you are not sure, you can find the name of the wired network interface with the command:

In the second line, you need to use the same interface name ( eth0 ).

Further in the third line, 192.168.0.100 is the IP that we want our system to always have. And /24 is an alternative way to set netmask. These characters correspond to 255.255.255.0.

As you might guess, in the last, fourth line, 192.168.0.1 means a gateway.

All these data need to be changed to fit your needs.

For the changes to take effect, issue the command:

Let's check:

change static ip kali linux

As you can see, the interface is really assigned the required IP and now it will be saved after each reboot.

However, there is currently no Internet connection, because we have not configured DNS. These settings are made in the /etc/resolv.conf file. If you already have Network Manager installed, then instead of /etc/resolv.conf there is a link to /run/NetworkManager/resolv.conf

Open /etc/resolv.conf with any text editor:

and add the line:

Finally, now you can check:

On Kali Linux, the made changes do not disappear after the download. If they disappear, the file /etc/resolv.conf can be protected from writing:

Related articles:

  • How to replace Default Desktop Environment with Cinnamon in Kali Linux (57.4%)
  • How to protect web server on Kali Linux from unauthorized access (50.7%)
  • How to update Kali Linux (50.3%)
  • How to install Guake in Kali Linux (50.3%)
  • How to Install Total Commander Counterpart in Kali Linux (50.3%)
  • How to protect the Apache web server from hacking in Windows (RANDOM - 9.6%)

Recommended for you:

7 comments to how to configure kali linux to use a static ip address.

' src=

Perfectly working for me !

' src=

Thank you so much, I wasted hours and hours of sweat and tears trying to understand hindi tutorials, but I now finally understand. 

' src=

Internet is not working

' src=

I found the only solution for my problem is this only…thankx……..

' src=

how to do it on xfce

' src=

Hello! The article has been supplemented, now it has become relevant again.

' src=

my initial comment fudged and webpage refreshed…. but anyway, the latter part explaining, /etc/resolv.conf , helped and worked! v/r Friend

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of followup comments via e-mail. You can also subscribe without commenting.

Sysprobs

Kali Linux Set Static IP – How to Configure in 2 Ways

A static IP address is simply one that doesn’t change over time. It’s a permanent address assigned to a device connected to a network. Unlike a dynamic IP address usually provided by a DHCP (Dynamic Host Configuration Protocol) server, which may change over time, a static IP address stays fixed.

So now you might wonder why you need a static IP address. Static IPs allow your device to be reached at the same address by a remote access service like a VPN . They also ensure you have better network security and consistent availability. Mail, FTP, and web servers also benefit from it.

Kali Linux Set Static Ip Main Image

In this tutorial, we’ll show you the different methods of setting up a static IP address in Kali Linux 2023.1. But, of course, the methods are more or less the same for older or upcoming versions.

Let’s get started!

How to Set Static IP in Kali Linux

Quick Navigation

Now that you have some basic ideas about static IP addresses let’s move on to the main part of the article, which is how to set it up in Kali Linux.

First, we need to check the network we are currently connected to. We can check the default gateway by running this command:

Ip R Command

The IP address you after ‘default via’ is the IP address that represents the default route or gateway. In our case, it’s 10.0.2.2.

For a more detailed version of your local IP addresses, you can use this command:

Ip A Command

Now notice the highlighted line. It displays the assigned IP address to the eth0 network interface. This is the address that will change once we set up a static IP. So without further ado, let’s see the different methods to set that in Kali Linux .

We will show you two terminal methods to set static ip in Kali Linux .

By Editing the Network Interface File

First, we’ll cover how you can do the whole process from your terminal. First, open the /etc/network/interfaces file in your preferred text editor. We will use Nano for this tutorial. So the command will be as follows:

This should open the file in the nano editor. Add the following lines to the file:

Replace the placeholder texts with the appropriate values. In our example, it looks like this:

Kali Linux Set Static Ip

The first line is the network interface. We saw this when we used the ‘ip r’ command. Yours may be different and in the format of wlpXsY where X and Y are numbers.

The third line is where you set your static IP address. You need to make sure that the IP address you’re entering is available. And lastly, the default gateway.

Once you’re done with the file, save it with Ctrl + O. Then exit using Ctrl + X. When that’s done, run the below command to make the changes take effect:

Restart Networking

You’re still not done. If you try to access the internet, it will fail. That’s because you haven’t yet set the Domain Name System. To do that, you need to tweak the /etc/resolv.conf. So first, open the file in a text editor. Or you can delete the file and create a new one.

To delete the file, use this command:

After that, create a new file in that same directory with the same name. You can do this by opening it in any file editor. To do that, run this command:

After the file opens, write the following line in the file

Update The DNS Server IP

Save the file and exit. Now test if it works by running this command:

Ping Command In Kali Linux

If you see a similar output, it means that it’s working fine.

Read Also: Best Laptops for Ethical hackers/hacking .

Using ifconfig

Another way to do this is by utilizing the ifconfig command. First, set the IP address and the netmask with the following command:

In our case, it looks like this:

Using Ifconfig

Once you’ve done that, now set the default gateway for the ethernet port zero by running this command:

For us, it will be like this:

Default Gateway

Now you only need to configure the DNS. You can do that with this command:

Open Resolv Conf

Remember to go root for this command.

If you’re uncomfortable using the terminal in Linux , you can follow this method instead.

You will find all the options at the top right corner of your home window. At the very left is the network settings icon. Right-click on the icon.

Open Network Adapter

From the drop-down menu, choose Edit Connections .

Edit Connection

A window will appear. Now choose the connection that you want to configure. In this case, we only have one option called Wired Connection 1,  so we will choose that.

Wired Connection Settings

Left-click on the connection name and press the setting icon at the bottom

Enable Edit Option

In the new window, click on the tab that says IPv4 Settings .

Set Static IP In Kali Linux GUI

Click on the Method  drop-down menu, and choose Manual .

Select Manual

Next, tap the Add  button to add a new IP address.

Add The New IP 1

Now is the most important part. You need to set an IP address, a Netmask, and a Gateway. One by one, type in the correct values.

Gateway Option

The green color indicates that the values we entered are available. Otherwise, it would be highlighted in red. After you’re finished, press the Save button.

Save The Settings

Now you need to restart your device. You can do that with this command:

So now, if you recheck the current IP address, it should be changed to the one you set.

Check The Static IP In Kali Linux

This article shows you how to set static IP Kali Linux. We’ve covered both the CLI and GUI method so that you can choose the one suitable for you. Please let us know in the comments below if you have any questions.

If you’d like to start your journey as an Ethical Hacker, we have 10 tips to enhance your Linux experience as a hacker . Remember to check it out.

If any of the above solutions did not fix the Windows PC issues, we recommend downloading the below PC repair tool to identify and solve any PC Issues.

change static ip kali linux

Dinesh is the founder of Sysprobs and written more than 400 articles. Enthusiast in Microsoft and cloud technologies with more than 15 years of IT experience.

You Can Read Next

6 Steps To Recover Your Hacked Email Or Social Media Account

6 Steps To Recover Your Hacked Email Or Social Media Account

Linux vs Solaris – What are the Differences and Things to Know

Linux vs Solaris – What are the Differences and Things to Know

Fedora vs Arch, Which One is Good in 2024?

Fedora vs Arch, Which One is Good in 2024?

10 Best Security Extensions for Chrome – Must-Know List

10 Best Security Extensions for Chrome – Must-Know List

How to Install and Use Outlook for Ubuntu 22.04 LTS/22.10

How to Install and Use Outlook for Ubuntu 22.04 LTS/22.10

Best 5 Laptops for Kali Linux in 2023

Best 5 Laptops for Kali Linux in 2023

Leave a comment cancel reply.

Save my name, email, and website in this browser for the next time I comment.

Learn New Tech Skills

How to Set a Static IP in Kali Linux Using the GUI and ifconfig?

' src=

If you are a Linux system administrator, you have definitely done the IP setup on Linux. Most people often forget the process of setting up IP (static or dynamic) in Linux. And there are many who are afraid of this. In this article, I will guide you How to Set a Static IP in Kali Linux Using the ifconfig both using GUI and Terminal. So, let’s begin without wasting any time.

How to Set up Static IP Address in Kali Linux Using the GUI?

Step #1. Find the default Gateway of the Your Router

The first step is that we have to find out the default gateway of the router, if you change the default gateway, then basically you cannot connect with the network. To find out the Default Gateway of the router, type the following command in the Terminal.

change static ip kali linux

Find The Default Gateway

Step #2 . Access Advanced Network Management

we have to access the advanced network management settings to configure the static IP address there. To access the advanced network management settings, right-click on the network connection and choose edit connections.

change static ip kali linux

Edit Network connection in Kali Linux

Under the Ethernet, choose WIred connection 1, then in the bottom click on the settings.

change static ip kali linux

Open Settings

Step #3. Set Static IP Address

once the advanced network management setting panel is open, go to the IPV4 category. First, change the method from DHCP to Manual, then insert the IP address, Netmask and the default Gateway. If they are available in the router, you will notice a green color, if they were taken, you will see a red color.

change static ip kali linux

Set Static IP Address

Once all the changes are saved, you have to restart the Kali Linux to apply IP Address changes to the nettrok.

How to set up a Static IP address using the ifconfig in Linux using Terminal?

Open the terminal and type the first below to set up a manual IP address alongside the subnet mask on Kali Linux. And by the way sure that the Terminal is running with the root user.

Now we need to set up the default gateway for the mentioned ethernet port, which is Ethernet 0 with an IP address of 192.168.1.2. Use the following command to configure the default gateway.

To configure the DNS, use the following command.

change static ip kali linux

Set up Static IP using the Ifconfig

Here are the commands which are applied in the Terminal Together.

Remember, for setting up a static IP, you have to configure the following options which we already did.

  • DNS 1 and DNS 2

Now that you have applied all the settings, it is time to make sure if the static IP address is working or no. To check it, type ping google.com and press enter.

If you see the following message, then it means you have to reconfigure the Static IP address.

  • ping: google.com: Temporary failure in name resolution

If you see the following message, then it means it is working totally fine and you are good to go.

To set up a static IP in Kali Linux, the step one is to find out the default gateway of the router. Then open the network management, go to the IPV4 panel, insert a static IP address. That’s all with How to set up static IP address in Kali Linux.

  • Click to share on Facebook (Opens in new window)
  • Click to share on LinkedIn (Opens in new window)
  • Click to share on Twitter (Opens in new window)
  • Click to share on Reddit (Opens in new window)
  • Click to email a link to a friend (Opens in new window)
  • Click to share on Telegram (Opens in new window)
  • Click to share on Pinterest (Opens in new window)
  • Click to print (Opens in new window)
  • Install Kali Linux
  • IP configuration
  • IT management
  • kali linux 2021.2
  • Static IP Address

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Notify me of follow-up comments by email.

Notify me of new posts by email.

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Security Analyst and Web Developer

How do I set up a static IP address in Kali Linux?

Kali Linux, a robust platform for ethical hacking and penetration testing, often necessitates the configuration of a static IP address for precise networking requirements. This comprehensive guide navigates the intricacies of setting up a static IP address in Kali Linux, empowering users to tailor their network configurations for optimal performance and stability.

1. The Significance of a Static IP Address

1.1. Stability and Predictability:

  • A static IP address ensures stability and predictability in network configurations. Unlike dynamic IP addresses assigned by DHCP, a static IP remains constant, allowing for consistent connectivity and ease of access in networking scenarios.

1.2. Custom Network Configurations:

  • In ethical hacking and penetration testing, specific network configurations are often required. Setting up a static IP address in Kali Linux provides users with the flexibility to design custom network environments tailored to their testing needs.

2. Identifying Network Interfaces

2.1. Using the ifconfig Command:

  • Begin by identifying the network interface associated with your system. The ifconfig command provides a detailed list of network interfaces, including their names and current configurations.
  • Identify the relevant interface, typically named eth0 or wlan0 for Ethernet and wireless connections, respectively.

3. Editing Network Configuration Files

3.1. Locating Configuration Files:

  • Network configurations in Linux are managed through files in the /etc/network/ directory. The primary configuration file for network interfaces is located at /etc/network/interfaces .

3.2. Editing with a Text Editor:

  • Open the configuration file using a text editor. You can use the nano text editor or any other editor of your choice.

4. Configuring a Static IP Address

4.1. Modifying the Configuration File:

  • Locate the entry for the desired network interface (e.g., eth0 or wlan0 ) in the configuration file. Modify the file to specify the static IP address, subnet mask, gateway, and DNS servers.
  • Adjust the values according to your network requirements.

5. Applying Network Changes

5.1. Restarting the Networking Service:

  • Once the configuration file is modified, restart the networking service to apply the changes.

5.2. Verifying the Configuration:

  • Use the ifconfig command to verify that the network interface now has the specified static IP address.

6. Additional Considerations

6.1. Persistent Configurations:

  • To ensure that the static IP address persists across reboots, consider configuring the network-manager service to manage interfaces. This involves editing the /etc/NetworkManager/NetworkManager.conf file.
  • Add the following line to the file:

7. Troubleshooting and Verifying Connectivity

7.1. Ping Test:

  • Verify connectivity by using the ping command to send packets to a known IP address, such as a gateway or an external server.
  • A successful response indicates that the static IP address is configured correctly and the network is functioning.

8. Conclusion: Tailoring Networks for Precision Testing

In conclusion, setting up a static IP address in Kali Linux is a fundamental skill for tailoring network configurations to the precise needs of ethical hacking and penetration testing. By following the steps outlined in this guide, users can establish a stable and predictable network environment, providing the foundation for conducting security assessments with precision. As the digital landscape continues to evolve, the ability to configure static IP addresses in Kali Linux remains an essential skill for cybersecurity professionals and enthusiasts navigating the network seas in pursuit of secure and resilient systems.

Continue your journey…

  • What is NetworkManager in Fedora?
  • How do I configure a static IP address in Kali Linux?
  • How do I configure a static IP address in Ubuntu?
  • How do I configure networking in Kali Linux?
  • How do I configure network settings in Fedora?
  • How do I configure network settings in Linux?
  • How do I set up a VPN on Kali Linux?
  • How do I check my IP address in Linux?
  • How do I connect to a wireless network in Kali Linux?
  • How do I set up networking for my virtual machine in Parallels?

Multiportmedia

Multiportmedia

Real world how to guilds and more!

Setting a Static IP address in Kali Linux

From the Kali desktop open a terminal window

Kali Linux Terminal

Now type the below command

Kali Linux Terminal with command

Add the below lines to the interfaces file after “iface lo inet loopback” and save it.

interfaces file Kali Linux

Now back in the terminal window, input the below commands.

Kail Terminal ip a

When you run the “ip a” command you should see your new IP settings.

Related Posts

Installing vmware powercli and connecting to vcenter.

change static ip kali linux

Buy Some Dogecoin!

How to install debian linux, leave a reply cancel reply.

You must be logged in to post a comment.

  • Fri. Feb 23rd, 2024

Linux Webhosting blog

Linux | CPanel | WHM | webhosting| Plesk | DirectAdmin | CentOs | Debian | Ubuntu Blog

How to configure Static IP Address in Kali Linux Command Line

change static ip kali linux

If for some reason you do not use Network Manager (for example, if you use Linux without a desktop graphical environment), you can configure a static IP address on the command line.

To do this, open the /etc/network/interfaces file with any text editor:

Only four lines should be added to this file. Example strings:

Let us examine them in more detail. eth0 is the name of the network interface. If there is only one network card, then in Debian (i.e., in Kali Linux too), this interface is called eth0. The second network interface is named eth1, etc.

If you are not sure, you can find the name of the wired network interface with the command:

In the second line, you need to use the same interface name ( eth0 ).

Further in the third line, 192.168.0.100 is the IP that we want our system to always have. And /24 is an alternative way to set netmask. These characters correspond to 255.255.255.0.

As you might guess, in the last, fourth line, 192.168.0.1 means a gateway.

All these data need to be changed to fit your needs.

For the changes to take effect, issue the command:

Let’s check:

As you can see, the interface is really assigned the required IP and now it will be saved after each reboot.

However, there is currently no Internet connection, because we have not configured DNS. These settings are made in the /etc/resolv.conf file. If you already have Network Manager installed, then instead of /etc/resolv.conf there is a link to /run/NetworkManager/resolv.conf

Open /etc/resolv.conf with any text editor:

and add the line:

Finally, now you can check:

On Kali Linux, the made changes do not disappear after the download. If they disappear, the file /etc/resolv.conf can be protected from writing:

Related Post

What is the lightest linux operating system, what is the difference between linux windows and bsds (open/free) which is more stable, what is linux file system and it’s architecture, mailscanner fails to start can’t locate sys/hostname, how to install custom ssl on nxfilter, how to convert normal ssl into jks (java keystore), mailscanner fails to start.

Static IP in Kali

Dec 23, 2020

Configuring a Static IP Address in the Kali Linux Command Line

If for some reason you do not use Network Manager (for example, if you use Linux without a desktop graphical environment), you can configure a static IP address on the command line.

To do this, open the /etc/network/interfaces file with any text editor:

In the second line, you need to use the same interface name ( eth0 ).

Further in the third line, 192.168.0.100 is the IP that we want our system to always have. And /24 is an alternative way to set netmask. These characters correspond to 255.255.255.0 .

As you might guess, in the last, fourth line, 192.168.0.1 means a gateway.

All these data need to be changed to fit your needs.

For the changes to take effect, issue the command:

1 sudo systemctl restart networking.service Let’s check:

As you can see, the interface is really assigned the required IP and now it will be saved after each reboot.

However, there is currently no Internet connection, because we have not configured DNS. These settings are made in the /etc/resolv.conf file. If you already have Network Manager installed, then instead of /etc/resolv.conf there is a link to /run/NetworkManager/resolv.conf

and add the line:

Finally, now you can check:

On Kali Linux, the made changes do not disappear after the download. If they disappear, the file /etc/resolv.conf can be protected from writing:

Tecmint: Linux Howtos, Tutorials & Guides

How to Set Static IP Address and Configure Network in Linux

If you are a Linux system administrator, time will come when you will need to configure networking on your system. Unlike desktop machines where you can use dynamic IP addresses, on a server infrastructure, you will need to setup a static IP address (at least in most cases).

Read Also: How to Set or Change System Hostname in Linux </p

This article is meant to show you how to configure static IP address on most frequently used Linux distributions.

For the purpose of this tutorial, we will use the following Internet Protocol version 4 (IPv4) details:

Configure Static IP Address in RHEL/CentOS/Fedora:

To configure static IP address in  RHEL / CentOS / Fedora , you will need to edit:

Where in the above "ifcfg-eth0" answers to your network interface eth0 . If your interface is named “ eth1" then the file that you will need to edit is "ifcfg-eth1" .

Let’s start with the first file:

Open that file and set:

Note : Make sure to open the file corresponding to your network interface. You can find your network interface name with ifconfig -a command .

In that file make the following changes:

You will only need to edit the settings for:

  • DNS1 and DNS2

Other settings should have already been predefined.

Next edit resolve.conf file by opening it with a text editor such as nano or vi :

Once you have made your changes restart the networking with:

Set Static IP Address in Debian / Ubuntu

To setup static IP address in Debian / Ubuntu , open the following file:

You may see a line looking like this:

Change it so it looks like this:

Save the file and then edit /etc/resolv.conf like this:

Restart the networking on your system with:

Your static IP address has been configured.

Conclusion:

You now know how to configure a static IP address on a Linux distro. If you have any questions or comments, please do not hesitate to submit them in the comment section below.

Previous article:

Next article:

Photo of author

Each tutorial at TecMint is created by a team of experienced Linux system administrators so that it meets our high-quality standards.

Related Posts

Extract Linux Tar Files Different or New Directory

How to Extract Tar Files to Specific or Different Directory in Linux

Debian Goodies Utilities to Manage Debian Packakges

8 Useful ‘Debian Goodies Utilities’ for Package Management

Delete User Accounts with Home Directory in Linux

How to Delete User Accounts and Their Home Directories in Linux

Find and Kill Running Processes in Linux

How to Find and Kill Running Processes in Linux

Set System Time, Date and Timezone in Linux

How to Set Time, Timezone and Synchronize System Clock in Linux

FFMPEG Command Examples in Linux

15 Must-Know FFmpeg Commands for Video, Audio & Image Conversion

32 thoughts on “How to Set Static IP Address and Configure Network in Linux”

The time will come when you will need to configure networking on your system. Unlike desktop machines where you can use dynamic IP addresses, on a server infrastructure, you will need to set up a static IP address (at least in most cases).

Terrible – and my ‘ linux distro ‘ isn’t the same as yours, there’s no ‘ /etc/sysconfig/ ‘ folder.

In Ubuntu 20.04 there is no interfaces file they switch to netplan . If you can update this article to include the new change it will help a lot.

thanks Raouf

Well, this isn’t correct. Just trashed my Linux mint distro

Is it public Static IP? or can I use to access data from other networks?

Failed to restart network.service: Unit network.service not found.

I’m asking a question on a fairly old thread, but just in case, is it possible to do this on a WIFI network?

For example, when using the first command (# nano /etc/network/interfaces ) in Ubuntu, the result I see is:

There isn’t an “ eth0 ” on my server because it is connected by WIFI only. Will it still work using another option?

Yes it will work I think so, just change the settings in the interfaces file as explained in this article.

I set the static IP in ifcfg-eth0, added HWADDR and UUID, but on reboot system does not associate the IP to eth0.

This is VM. Any idea why its happening and steps to troubleshoot.

I think you need to make sure that you select “ manual ” and the correct IP address, subnet mask, and gateway and save the configuration as explained in the article. Also, I personally would select a new and different IP address, so that you can really check if it has been saved by opening the terminal and typing:

after a restart.

If i set ip address as static am not able to ping google.com why and also packages are not installed.

Please give me reply as soon as possible.

@Rajeshkar,

Please add the DNS Name servers in your /etc/resolv.conf file..

@Ravi Saive thanks for your reply , yes i did /etc.resolv.conf also but getting the same problem

@Rajesekar,

The file is /etc/resolv.conf , in this file add your DNS name servers for example.

When I enter the /etc/resolv.conf file, what is it supposed to look like? And when you say “edit” do you mean delete what’s there and write what you’ve provided, or just add new lines?

Hello Marin, Thank you very much for this article. It was a major help in my class project. This is my first time using a vm and it is an awesome learning experience. I’m really glad I ran into this article, it was well written and easy to follow.

Just wanted to say a million thank you’s for this well-written, comprehensive and easily-understood article! Awesome stuff! A real lifesaver too, as I had to quickly configure a static IP for myself to get access to remote computing. Thank you! :-D

A question from a linux newbie. Does this instruction apply for both ubuntu running on my desktop PC as well as debian linux on an embedded board?

Yes, the instructions will works on any Debian/Ubuntu based distribution without any issues..have you tried on your embedded board? does these instructions worked? let us know.

Hi Ravi, thanks for your reply.

Default the folder /etc/sysconfig does not exist on my embedded system. Of Course i could create it as well as the files mentioned, but it would be out of the context of this instructions.

Thanks, Rob

I found here very good stuff! You are doing an excellent job and I like your site! Thanks!

Thanks for finding this site very useful and thanks for appreciating our work, Keep visiting for more such useful articles…

Great job, I was I actually looking for an article like this one. So thank you so very much. Keep up the good work.

Thanks for appreciating and finding this article useful, keep connected to Tecmint for such wonderful articles…:)

What if I have 2 NICs on my server one for LAN & one for WAN and I want to set one of them (WAN) as default gateway? How to configure this server as gateway and as a router.

The easiest way to add default gateway using route command as shown:

Don’t forget to replace the gateway IP address and interface-name in the above command.

One can also use following command to setup static IP on eth0 interface for example. # ifconfig eth0 192.168.1.1 netmask 255.255.255.0 up # route add default gw 192.168.0.1 # service network restart

Thanks for the tip, but I think setting IP address directly from the commandline using ifconfig and route will only allow you to set temporarily, once you reboot, these settings disappears. So, the best option to set static IP address permanently in network configuration files only….

wipe on reboot, so that best option is to set permannetly

Hello Ravi, What is difference between the service “NetworkManager” and “network”

@Augustine,

This article will help you to understand the difference between and NetworkManager and Network: http://askubuntu.com/questions/1786/what-is-the-difference-between-network-manager-and-ifconfig-ifup-etc

Why do we need to specify DNS in both ifcfg-eth0 and resolvlf.conf?

Hello Augustine,

Actually if you have added the DNS servers in the ifcfig-eth0 file the DNS servers will be automatically added to /etc/resolv.conf. You can skip defining the DNS servers in the ifcfig-eth0 file, but then you will need to have them set in /etc/resolv.conf manually. It’s a good practice to make sure that the DNS servers are specified correctly in both files, this is why the article says to set them in both files.

Got something to say? Join the discussion. Cancel reply

Thank you for taking the time to share your thoughts with us. We appreciate your decision to leave a comment and value your contribution to the discussion. It's important to note that we moderate all comments in accordance with our comment policy to ensure a respectful and constructive conversation.

Rest assured that your email address will remain private and will not be published or shared with anyone. We prioritize the privacy and security of our users.

Save my name, email, and website in this browser for the next time I comment.

Practical Web Penetration Testing by Gus Khawaja

Get full access to Practical Web Penetration Testing and 60K+ other titles, with a free 10-day trial of O'Reilly.

There are also live events, courses curated by job role, and more.

Setting a static IP on Kali

Sometimes, you need to have a dedicated static LAN IP address for your Kali Linux. A very practical scenario is when you're on duty and you want to go under the radar, by not communicating with the DHCP server of your client (or your employer). Another purpose for a static IP address is if you have a separate VLAN, and you want to join it manually.

Let's look at the implementation of a static IP address:

  • First, open the file /etc/network/interfaces using your favorite text editor:

change static ip kali linux

I will add a new static IP address, 10.0.0.99 , to the network 10.0.0.0/24 , at the end of the file. In your case, the network will probably ...

Get Practical Web Penetration Testing now with the O’Reilly learning platform.

O’Reilly members experience books, live events, courses curated by job role, and more from O’Reilly and nearly 200 top publishers.

Don’t leave empty-handed

Get Mark Richards’s Software Architecture Patterns ebook to better understand how to design components—and how they should interact.

It’s yours, free.

Cover of Software Architecture Patterns

Check it out now on O’Reilly

Dive in for free with a 10-day trial of the O’Reilly learning platform—then explore all the other resources our members count on to build skills and solve problems every day.

change static ip kali linux

  • Command Line Interface (CLI)
  • Denial-of-Service Attack (DoS)
  • Desktop Managers
  • Linux Administration
  • Virtual Private Network (VPN)
  • Wireless LAN (Wi-Fi)
  • Privacy Policy

blackMORE Ops Learn one trick a day ….

Setup dhcp or static ip address from command line in linux.

March 26, 2015 Command Line Interface (CLI) , How to , Linux , Linux Administration , Networking 25 Comments

This guide will guide you on how to setup DHCP or static IP address from command Line in Linux. It saved me when I was in trouble, hopefully you will find it useful as well. In case you’ve only got Wireless, you can use this guide to connect to WiFi network from command line in Linux .

Note that my network interface is eth0 for this whole guide. Change eth0 to match your network interface.

Static assignment of IP addresses is typically used to eliminate the network traffic associated with DHCP/DNS and to lock an element in the address space to provide a consistent IP target.

Step 1 : STOP and START Networking service

Some people would argue restart would work, but I prefer STOP-START to do a complete rehash. Also if it’s not working already, why bother?

Step 2 : STOP and START Network-Manager

If you have some other network manager (i.e. wicd, then start stop that one).

Just for the kicks, following is what restart would do:

Step 3 : Bring up network Interface

Now that we’ve restarted both networking and network-manager services, we can bring our interface eth0 up. For some it will already be up and useless at this point. But we are going to fix that in next few steps.

The next command shows the status of the interface. as you can see, it doesn’t have any IP address assigned to it now.

Step 4 : Setting up IP address – DHCP or Static?

Now we have two options. We can setup DHCP or static IP address from command Line in Linux. If you decide to use DHCP address, ensure your Router is capable to serving DHCP. If you think DHCP was the problem all along, then go for static.

Again, if you’re using static IP address, you might want to investigate what range is supported in the network you are connecting to. (i.e. some networks uses 10.0.0.0/8, some uses 172.16.0.0/8 etc. ranges). For some readers, this might be trial and error method, but it always works.

Step 4.1 – Setup DHCP from command Line in Linux

Assuming that you’ve already completed step 1,2 and 3, you can just use this simple command

The first command updates /etc/network/interfaces file with eth0 interface to use DHCP.

The next command brings up the interface.

With DHCP, you get IP address, subnet mask, broadcast address, Gateway IP and DNS ip addresses. Go to step xxx to test your internet connection.

Step 4.2 – Setup static IP, subnet mask, broadcast address in Linux

Use the following command to setup IP, subnet mask, broadcast address in Linux. Note that I’ve highlighted the IP addresses in red . You will be able to find these details from another device connected to the network or directly from the router or gateways status page. (i.e. some networks uses 10.0.0.0/8, some uses 172.16.0.0/8 etc. ranges)

Next command shows the IP address and details that we’ve set manually.

Because we are doing everything manually, we also need to setup the Gateway address for the interface. Use the following command to add default Gateway route to eth0 .

We can confirm it using the following command:

Step 4.3 – Alternative way of setting Static IP in a DHCP network

If you’re connected to a network where you have DHCP enabled but want to assign a static IP to your interface, you can use the following command to assign Static IP in a DHCP network, netmask and Gateway.

At this point if your network interface is not up already, you can bring it up.

Step 4.4 –  Fix missing default Gateway

Looks good to me so far. We’re almost there.

Try to ping http://google.com/ (cause if www.google.com is down, Internet is broken!):

Step 5 : Setting up nameserver / DNS

For most users step 4.4 would be the last step. But in case you get a DNS error you want to assign DNS servers manually, then use the following command:

This will add Google Public DNS servers to your resolv.conf file. Now you should be able to ping or browse to any website.

Losing internet connection these days is just painful because we are so dependent on Internet to find usable information. It gets frustrating when you suddenly lose your GUI and/or your Network Manager and all you got is either an Ethernet port or Wireless card to connect to the internet. But then again you need to memorize all these steps.

I’ve tried to made this guide as much generic I can, but if you have a suggestion or if I’ve made a mistake, feel free to comment. Thanks for reading. Please share & RT.

change static ip kali linux

Find exact installation date of Linux

Ran into an interesting question today while trying to debug a problem with a monitoring …

Correct way of installing VirtualBox Guest Additions in Kali Linux 2016.2/2017 (Kali Rolling)

How to install VirtualBox Guest Additions in Kali Linux (Kali Rolling / Kali Linux 2016.2 / Kali 2017)

Since Kali Linux 2016 came out (also known as Kali Rolling), it seems that Official …

25 comments

' src=

Just wanted to say, your guides are amazing and should be included into kali’s desktop help manual. Thanks for your awesome work!

' src=

Hi Matt, That’s very kind, thank you. I’m happy that my little contributions are helping others. Cheers, -BMO

' src=

I’ve gone through the steps listed in Step 4.2 and when I check my settings are correct, until I reboot. After I reboot all my settings have reverted back to the original settings. Any ideas?

' src=

The only problem with this is that nowadays Linux machines aren’t always shipped with the tools you use. They are now shipped with the systemd virus so the whole init.d doens’t work anymore and ifconfig isn’t shipped on a large number of distro’s.

Hi, The intention was to show what to do when things are broken badly. In my case, I’ve lost Network Manager and all of Gnome Desktop. I agree this is very old school but I’m sure it’s better than reinstalling. Not sure what distro you’re talking about. I use Debian based Kali (and Debian Wheezy), CentOS(5,6,7) and Ubuntu for work, personal and testing. ifconfig is present is every one of them. ifconfig also exists in all variants of server distro, even in all Big-IP F5’s or CheckPoint Firewalls. Hope that explains my inspiration for this article. Cheers, -BMO

' src=

Hi , I want to say Thank you for your Guide, it’s very useful. and want to add another method for Step 5 : Setting up nameserver / DNS: add nameserver directly to resolv.conf file

nano /etc/resolv.conf

Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8)

DO NOT EDIT THIS FILE BY HAND — YOUR CHANGES WILL BE OVERWRITTEN

nameserver 8.8.8.8 nameserver 8.8.4.4 search Home

' src=

nano or vi is not requiered, use “printf” instead “echo”… e.g:

printf “nameserver 8.8.8.8\nnameserver 8.8.4.4\n” >> /etc/resolv.conf

double-check with:

grep nameserver /etc/resolv.conf

' src=

Hey I’m new to VM my eth0 inet addr is 10.0.02.15 but every video I watch their inet addr always starts with 192. I was wondering what I can do to change my inet addr to start with 192. Is this guide a solution

Hi Billy Bob, Is 10.x address coming from VBox internal or from your router? You possibly selected Bridged network. Try juggling between Bridged and NAT. Also look up VBox IP addressing in Google. Cheers -BMO

' src=

Please help, I’ve done all these steps and still I don’t have internet connection with bridged adapter. When I set NAT I have internet connection but with bridged adapter i don’t. I checked with ifconfig eth0 command and I have ip, netmask and broadcast ip. What could be the problem?

' src=

Excellent guide. I haven’t been using any debian based linux distros in a while and forgot where the entries go manually. I was actually kind of surprised how long it took to find your page in google, there is a lot of pages that don’t actually answer the question, but yours was spot on.

' src=

I did all the commands but my IP address doesn’t show up, and now my internet server on Linux iceweasel is down. It’s telling me that “Server not found” I really need help.

' src=

Hi Blackmoreops Thanks for the tutorial. I do have a question tho, in kalisana, I have followed your advice step by step to configure a static ip on my kali VM. But when I check with ifconfig, I still get the ip assigned by my modem? I run the kali vm on fedora 22 host… Is there a way around this? Regards Adexx

' src=

Hey Blackmoreops, Thanks for the great article. Being a total NOOB, I’m wondering if these are the last steps in getting my correct lab setting to enumerate De-Ice 1.100 with nmap. My current setting on Kali 2016 machine are: add:192.168.1.5 , mask: 255.255.255.0, default gw 192.168.1.1. Both machine set to NAT in Virtualbox 5. I’ve tried numerous scans ie., ping, list proctocol verify, and stealth and I’m unable to find any open ports. Help!!!!!!!

Best Regards. C

' src=

i tried on my kali linux but i lost my internet connection

' src=

hello everyone i have got problem on my kali linux with internet. Kali is connected to my wifi but iceweasel can’t open any site. Can you help me solve this problem please ?

' src=

check mtu and DNS

' src=

Followed through all the steps, and it worked. Then I restarted the router, and everything is back to the earlier configuration?

' src=

thanks for tutorial.bu how change the ip that blocked by google :D

' src=

Hello sorry but wasnt able to configure my network. I installed kali into my hdd and im using it as my main OS on this pc(idk if thats recommended or not) . I am curently connected to the internet with an ethernet cable and somehow in th top-right corner it says that is curently connected but when i try to open ice weasel i get a message that tells me “server not found” can someone please tell me how to fix this issue and also i followed your tutorial until the end but i had trouble in the end because i get this message bash: /etc/resolv.conf: no such file or directory . If you can help me i would be so gratefull. Sorry for butchering the english language and its grammar

' src=

Sir, How can we change or spoof dns server in kali Linux.

' src=

I can’t get my static IP address to ping google.

This is what I am trying to do:

ping google.com using a server created with static IP address using Linux Redhat VM Ware,

please help!

' src=

For setting up DHCP using the Command : ifconfig eth0 inet dhcp Also works

For setting up DHCP using command : ifconfig eth0 inet dhcp Also works

Use WordPress.com, Twitter, Facebook, or Google+ accounts to comment (anonymous comments allowed). Leave your solution to help others. Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed .

Privacy Policy on Cookies Usage

Some services used in this site uses cookies to tailor user experience or to show ads.

XDA Developers

How to set a static internal IP in Ubuntu

Quick links, how to set static internal ip in ubuntu using the gui, how to set static internal ip in ubuntu using the terminal and text editor.

There comes a time when you might have to configure Ubuntu or any other Linux distribution with a static IP address. While you can't change your external static IP address, since it's the one your internet service provider provides, you can change your internal one. This is the IP address used on your network inside your home or office.

Though many tasks on Ubuntu usually require you to visit the terminal app and deal with lines of text, changing your internal IP is easy. You can do this through the settings app and the Graphical User Interface (GUI). Of course, if you want, you can also swap things out by going through the terminal. Here's how.

Without any technical know-how or knowledge, you can set a static IP in Ubuntu through the settings app. Just note, you will have to use the terminal once to find a range of IP addresses that you can assign. Once you do that, you just tap the Windows Key or the Superkey on your device and search for Settings . Once the app is open, proceed with the steps below.

  • If you're connected to the internet via Wi-Fi, choose Wi-Fi . If you're connected via Ethernet, select Network.
  • Once the interface is open, click the settings icon next to the network you're connected to.
  • From the list of tabs at the top, choose IPv4.
  • Under ipv4 method, be sure to choose Manual.
  • Under Addresses, enter the IP address, the Netmask, and the Gateway you want to use. For finding IP addresses that'll work on your network, you can proceed with the steps below.
  • Open a terminal session. With Ctrl, Alt, and T. Install net-tools with the command sudo apt install net-tools.
  • In this case, we have an inet of 192.168.1.176 and a netmask of 255.255.255.0. We can enter those numbers and can calculate the usable range using this website .
  • When you've calculated the usable range of addresses, choose a valid IP address that falls within this range. Then, you can click Apply at the top.

Any changes you apply will automatically go into effect. If you want, you can also use the terminal to confirm your IP address. Launch it with Ctrl, Alt, and T on your keyboard. Once launched, enter the command ip addr or ip a . You should see an interface IP address listed.

If you're a bit more technical and want to set a static IP in Ubuntu using the terminal, that is possible. You'll have to edit some lines of text and go through a few extra steps, but here's how:

  • Display information about your network. Use the command nmcli connection show. You'll see a network name, a UUID, a Type, and a Device. If this package isn't installed (though it should be, as it comes preinstalled with Ubuntu), then run sudo apt-get install network-manager
  • Note down the range of IP addresses you'll be able to use. Use the command ip addr to find out your machine's current IP address. This tutorial assumes that your network adapter is called enp0s3. If it isn't, then look for the correct one and also change the interface names in the subsequent commands. In the above example, we have an inet of 10.0.2.15, with the /24 denoting that the network uses a 255.255.255.0 subnet mask. In most cases, your usable network range will be whatever is in the first three places of the internal IP address, and then any unused number on your network between 1 and 255 in the last section. For example, we can use 10.0.2.16. If you're unsure, you can enter the subnet mask and your internal IP address into this website to calculate the usable range.
  • Note the IP address of your default gateway with the command ip r. In our example, it's 10.2.2.2.
  • Next, we'll add a new static connection option. Run the following command, making sure to change the numbers after "ip4" and "gw4" depending on your network conditions. These are the IP address you want to change your machine to and the current default gateway, respectively. sudo nmcli con add con-name "static" ifname enp0s3 type ethernet ip4 10.0.2.13/24 gw4 10.0.2.2 In our case, we do the following.
  • Set your DNS, manual DHCP (so, a static IP), and enable the connection. You can do that by running the following commands in succession. nmcli con mod "static" ipv4.dns "1.1.1.1,8.8.8.8" You can swap out the DNS servers above for whatever you want, they are in order of primary and secondary. nmcli con mod "static" ipv4.method manual; nmcli con up "static" ifname enp0s3 Once done, you can run nmcli con show to see if the new connection is enabled. If the output above looks like yours, then you're ready to go!

Setting complete

That's all you need to set up a static IP in Ubuntu. It doesn't take much effort. Remember, we're always writing about Linux, so you can check out our guide to the best Linux laptops should you need one.

How to set a static internal IP in Ubuntu

IMAGES

  1. Setting a Static IP address in Kali Linux

    change static ip kali linux

  2. How to Set a Static IP in Kali Linux Using the GUI and ifconfig?

    change static ip kali linux

  3. Kali Linux: Your Guide To Setting A Static IP Address

    change static ip kali linux

  4. How to Set a Static IP in Kali Linux Using the GUI and ifconfig?

    change static ip kali linux

  5. Setting a Static IP address in Kali Linux

    change static ip kali linux

  6. How To Set A Static Ip In Kali Linux Using The Gui And Ifconfig

    change static ip kali linux

VIDEO

  1. How To Use VPN in Kali Linux Hide your real IP (100%working)

  2. simple find any ip in kalilinux

  3. How to Trace IP address in Kali Linux

  4. Ethical HACKING Lesson

  5. Set Static IP address in Linux Mint 21.3 Cinnamon

  6. Kali Linux Terminal

COMMENTS

  1. How to Configure Static IP address in Kali Linux

    Configure static IP in the Network Manager in our Kali Linux. Configure static IP in command line. Configure an External static IP. Configure static IP in router settings We can bind a fixed/static IP address with our mac address (unique & fixed hardware address for every device) in our router's setting.

  2. Configuring a Static IP Address in the Kali Linux Command Line

    Configuring a Static IP Address in the Kali Linux Command Line By 24x7support Mar 20, 2020 kali, kali linux, linux, OS If for some reason you do not use Network Manager (for example, if you use Linux without a desktop graphical environment), you can configure a static IP address on the command line.

  3. How to configure Kali Linux to use a static IP address

    1. What are advantages of a static IP address usage? 2. Manually assigning IP addresses bypassing DHCP in the router 3. What are Address, Netmask, Gateway and DNS server when setting up a static address 4. Setting up a static IP address in Kali Linux (in Xfce) 5. Configuring a Static IP Address in Network Manager in Kali Linux (GNOME) 6.

  4. Kali Linux Set Static IP

    CLI Method We will show you two terminal methods to set static ip in Kali Linux. By Editing the Network Interface File First, we'll cover how you can do the whole process from your terminal. First, open the /etc/network/interfaces file in your preferred text editor. We will use Nano for this tutorial. So the command will be as follows:

  5. How Do I Configure A Static IP Address In Kali Linux?

    The default network manager in Kali Linux is NetworkManager. Follow these steps to set up a static IP address: 2.1. Identify Network Interface Name. Before editing the network configuration file, you need to identify the network interface name of your device. Open a terminal in Kali Linux and enter the following command:

  6. How to Set a Static IP in Kali Linux Using the GUI and ifconfig?

    Edit Network connection in Kali Linux Under the Ethernet, choose WIred connection 1, then in the bottom click on the settings. Open Settings Step #3. Set Static IP Address once the advanced network management setting panel is open, go to the IPV4 category.

  7. How Do I Set Up A Static IP Address In Kali Linux?

    Kali Linux, a robust platform for ethical hacking and penetration testing, often necessitates the configuration of a static IP address for precise networking requirements. This comprehensive guide navigates the intricacies of setting up a static IP address in Kali Linux, empowering users to tailor their network configurations for optimal performance and stability. 1. The Significance […]

  8. Setting a Static IP address in Kali Linux

    From the Kali desktop open a terminal window Now type the below command gedit /etc/network/interfaces Add the below lines to the interfaces file after "iface lo inet loopback" and save it.

  9. How to configure Static IP Address in Kali Linux Command Line

    If for some reason you do not use Network Manager (for example, if you use Linux without a desktop graphical environment), you can configure a static IP address on the command line. To do this, open the /etc/network/interfaces file with any text editor: sudo vim /etc/network/interfaces Only four lines should be added to this file. Example strings:

  10. How to set Static IP Address on Kali Linux

    In this video, you will learn how to set and configure a static IP address on Kali Linux.Dynamic IP addresses might change each time you connect to a network...

  11. Manual Network Configuration in Linux and How to Set a Static IP

    a specific IP address; full control over the address assignment; Since the Dynamic Host Configuration Protocol (DHCP) can take the Media Access Control (MAC) address into account when assigning the network-layer address, we might still automatically receive the same IP on each connection with that protocol. Moreover, the client can usually specify a preference.

  12. How to configure and customize Kali Linux

    It is recommended to change the default password; to do so, run the following command in the Kali Linux terminal: How to change password in Kali Linux terminal ... you can append the same network configuration file with the following lines and quickly set up a static IP to your version of Kali Linux:

  13. Simply Changing a Static IP Address : r/Kalilinux

    auto eth0 iface eth0 inet static address 192.168.100.50 gateway 192.168.100.1 netmask 255.255.255.. Obviously you need to change the config depending on your setup. Now restart the networking.service and NetworkManager.service. Then check with ifconfig if the ip is set and try to ping the gateway to check if it's reachable.

  14. Setting a static IP address

    A static IP address will ensure that the IP address does not change and, therefore, that users on the network will always be able to access the resources/server once network connectivity is established. Having a server within an organization or within our lab will definitely require an address that does not change. To do this, follow these steps:

  15. Trouble switching from DHCP to a static IP on Kali Linux

    9 1 4 Try replacing auto wlan0 with allow-hotplug? See if that changes your issue? - Stark07 Dec 18, 2014 at 13:51 You should first learn how the DHCP client is triggered. There's a high chance that you are accidentally running some piece of software at boot time. - Pavel Šimerda Dec 18, 2014 at 21:47 Add a comment 3 Answers

  16. Static IP in Kali

    As you might guess, in the last, fourth line, 192.168..1 means a gateway. All these data need to be changed to fit your needs. For the changes to take effect, issue the command: 1 sudo systemctl restart networking.service Let's check: ip a. As you can see, the interface is really assigned the required IP and now it will be saved after each ...

  17. How To Configure A Static IP Address and DNS on Kali Linux

    How to configure a static IP address and DNS on Kali Linux

  18. How to Set Static IP Address and Configure Network in Linux

    Open that file and set: NETWORKING=yes HOSTNAME=node01.tecmint.com GATEWAY=192.168..1 NETWORKING_IPV6=no IPV6INIT=no Next open: # vi /etc/sysconfig/network-scripts/ifcfg-eth0 Note: Make sure to open the file corresponding to your network interface. You can find your network interface name with ifconfig -a command.

  19. How To Change IP Address on Linux

    To change your IP address on Linux, use the "ifconfig" command followed by the name of your network interface and the new IP address to be changed on your computer. To assign the subnet mask, you can either add a "netmask" clause followed by the subnet mask or use the CIDR notation directly.

  20. Setting a static IP on Kali

    Sometimes, you need to have a dedicated static LAN IP address for your Kali Linux. A very practical scenario is when you're on duty and you want to go under the radar, by not communicating with the DHCP server of your client (or your employer). Another purpose for a static IP address is if you have a separate VLAN, and you want to join it manually.

  21. Setup DHCP or static IP address from command line in Linux

    Step 4.3 - Alternative way of setting Static IP in a DHCP network. If you're connected to a network where you have DHCP enabled but want to assign a static IP to your interface, you can use the following command to assign Static IP in a DHCP network, netmask and Gateway.

  22. How to Change IP Address in Linux

    To apply the changes, you need to run the command: $ sudo systemctl restart networking.service Tip: On RedHat-based systems, the file '/etc/sysconfig/networking-scripts/ifcfg-*' serves the purpose of configuring network interfaces. Using Netplan for Network configuration (for Ubuntu)

  23. How to Set Static IP Address and Modifying Routing Table on Linux

    Configuring IP addresses and routes from the command line is a mandatory skill that every Linux administrator should learn. In this article, we will review how we can assign a static IP address using ip and ifconfig commands.. In addition, we will discuss how we can use the ip route command to create a static route to change the default gateway for the Linux system.

  24. Raspberry Pi Kali Linux headless setup

    Click on Kali Linux to expand the list of Kali installation options. Choose to install Kali Linux on Raspberry Pi imager tool; Click on the Kali Linux option that corresponds to your Raspberry Pi model and CPU architecture. For all recent models, this should be the 64 bit version. Choose which Kali Linux OS image you wish to install

  25. How to set a static internal IP in Ubuntu

    If you're connected to the internet via Wi-Fi, choose Wi-Fi.If you're connected via Ethernet, select Network.; Once the interface is open, click the settings icon next to the network you're ...